3D Printing Materials

Resin-9006

Introduction of 3D Printing Materials

Characteristics

SZUV-S9006 ???

PRODUCT DESCRIPTION?

SZUV-S9006?is an ABS like SL resin which has high-toughness?features. It is designed for solid state SLA platforms.?SZUV-S9006?can be applied in master patterns, concept models, assembly parts and functional prototypes in the?field of automotive, medical and consumer electronics industries.The parts duability building with SZUV-S9006?is over 6.5months.SZUV-S9006?

TYPICAL FEATURES

-Liquid resin`s medium viscosity, so easy recoating, easy clean parts and machines?

-Improved strength retained, improved dimensions retention of parts in humid condition?

-need minimal part finishing

-Long shelf life in machine

-Low bottom contraction?

?

TYPICAL BENEFITS

-Need less part finishing time,easier post-curing?

-Buliding accurate and high tough parts with an improved dimensional stability?

-High quality controls for vacuum casting parts

-Low shrink and good resistance to yellowing?

-Magnificent white color?

-Outstanding machinable SLA material?

High-toughness?

?Physical Properties – Liquid Material?

?

Mechanical Properties of Post-Cured Material?

?Note: the temperature of szuv-s9006 should not be too high. Please use it below 25c.The relative humidity for use and storage must be under 38RH%.

Fire Fighting Measures

（1）extinguishant

Dry powder fire extinguishing agent, alcohol resistant foam extinguishing agent, carbon dioxide, dry sand, spray water.

（2）Special risk

Fires may produce irritation and harmful gas

（3）The firemen of protective measures

Fireman should wear protective appliances (eye protection, protective clothing, mailing gas with gas mask, etc.), put out the fire in the windward.

6.Accidental Release Measures

（1）Homework personnel protective equipment

Ensure adequate ventilation, wear suitable protective clothing, make a good job in hand and eye/face protection.

（2）Environmental protection measures

Prevent products from entering the drain or open water

（3）Cleaning method

For a small amount of leakage, use dry sand, soil and towels absorb the residual liquid, recycling and airtight container.

For a large number of leakage, leakage of liquid can be in front of the embankment, the introduction of recycle to safe place.

（4）Secondary hazard prevention measures

Quickly remove all fire spark (ban on smoking in nearby, and the ignition).

7.Handling And Storage

（1）Operation treatment technical measures

Avoid contact with eyes, skin and clothing. Don’t inhaling mist or steam, don’t accidentally swallow, keep container tightly closed after the thorough cleaning.

（2）Partial or full ventilation

Maintain adequate ventilation

（3）Safe handling matters needing attention

No?smoke, no fire

（4）Safe storage conditions

Stored in a cool, well ventilated place, away from heat, sparks and flames. Keep container tightly closed until it is put into use.

（5）packaging container and material

In the process of custody, please do not transfer to other containers. Don’t fall back to the original containers of products that will be used.

Cases

SOME OF MY PROJECTS

Education

Hand Molds

Auto Parts

Packaging Design

Art Design

Medical