Resin SZUV-T1150-iska caabinta heerkulka sare
Hordhac Guud
Astaamaha:
SZUV -T1150 waa huruuda SL jaalaha ah kaas oo leh wax qabad kulayl aan la mid ahayn. Waxay u adkeysan kartaa heerkulka ka badan 200 ℃ waqti gaaban iyo 120 ℃ waqti dheer. Waxaa loogu talagalay in lagu xakameeyo noocyo kala duwan oo heerkul sare ah iyo codsiyada baaritaanka xun.
Tilmaamaha Caadiga ah
Xoog Sare iyo Iska caabin Wanaagsan
SZUV-T1150 waxay u istaagi kartaa qoyaanka, biyaha iyo dareerayaasha, sida shidaalka, dareeraha gudbinta, saliidda iyo qaboojiyaha. Iyada oo iska caabbinta kulaylka aan la barbar dhigi karin, waxay ku habboon tahay qulqulka, HVAC, nalalka, qalabaynta, naqshadaynta iyo codsiyada tijaabada dabaysha.
Si Dhakhso leh u Dhiso oo si Dhakhso leh u horumari
Adiga oo siinaya wax soo saar degdeg ah iyo qaybo leh dusha si fudud oo si fudud loo maarayn karo, SZUV-T1150 waxay dhamayn kartaa mashruucaaga sawir ilaa qaybaha tijaabada wakhtiga ugu yar.
Codsiga caadiga ah
-Tijaabada qaybta hoosteeda
-Qalabaynta heerkulka sare ee RTV
-Tijaabada tunnel dabaysha
-Tijaabada qalabka iftiinka
- qalabaynta autoclave isku dhafan
-Baaritaannada qaybaha HVAC
-Tijaabada qaadashada kala duwan
-Orthodontics
Kiisaska Codsiga
Waxbarashada
Hands Molds
Qaybaha Gawaarida
Naqshadaynta Baakadaha
Naqshadaynta Farshaxanka
Caafimaad
?
| Muuqashada | caddaan |
| Cufnaanta | 1.13g/cm3@ 25 ℃ |
| Viscosity | 430 ~ 510 cps @ 27 ℃ |
| Dp | 0.155 mm |
| Ec | 7.3mJ/cm2 |
| Dhumucda lakabka dhismaha | 0.05 ~ 0.12mm |
?
| Cabbirka | Habka Imtixaanka | Qiimaha | |
| 90-daqiiqo UV daawaynta ka dib | 90-daqiiqo UV +2 saacadood@160℃ kulaylka daawaynta kadib | ||
| Hardness, Shore D | ASTM D2240 | 88 | 92 |
| Hababka dabacsanaanta, Mpa | ASTM D790 | 2776-3284 | 3601-3728 |
| Xoog dabacsanaan, Mpa | ASTM D790 | 63-84 | 92-105 |
| Module tensile, MPa | ASTM D638 | 2942-3233 | 3581-3878 |
| Xoog xajin, MPa | ASTM D638 | 60-71 | 55-65 |
| Dheeraynta xilliga nasashada | ASTM D638 | 4-7% | 4-6% |
| Awoodda saamaynta, lzod la jeexjeexay, J/m | ASTM D256 | 12-23 | 11-19 |
| Heerkulka leexashada kulaylka, ℃ | ASTM D 648 @66PSI | 91 | 108 |
| Kala guurka dhalada, Tg, ℃ | DMA, ugu sarreysa | 120 | 132 |
| Isku-dhafka balaarinta kulaylka, E6/℃ | TMA (T | 78 | 85 |
| Dhaqdhaqaaqa kulaylka, W/m.℃ | ? | 0.179 | ? |
| Cufnaanta | ? | 1.26 | ? |
| nuugista biyaha | ASTM D 570-98 | 0.48% | 0.45% |
?
?
?
?
?
?
?
?
?
?
?
?
?
