Ivolumu yokwakha enkulu: 800*800*550 mm (okujwayelekile 550mm, ukujula kwethangi le-resin kungenziwa ngendlela oyifisayo)
Ngobuchwepheshe bokuskena be-variable-beam.
Ukubekezelela kwe-resin enkulu kanye nomsebenzi wokugcwalisa ngokuzenzakalelayo.
Ubuchwepheshe obuningi obuqinisekisa ukunemba okuphezulu, ukuzinza okuphezulu, nokusebenza kahle okuphezulu kokuphrinta kwenqwaba.
| Imodeli | I-3DSL-800 |
| Usayizi wefomu le-eksisi ye-XY | 800mm×800mm |
| Usayizi wefomu le-eksisi Z | 100-550 mm |
| Usayizi womshini | 1930mm×1460mm×2200mm |
| Isisindo somshini | 1500kg |
| Qala iphakheji | 560kg(550kg+10kg) |
| Ukusebenza kahle kokuphrinta | ubuningi 400g/h |
| Isisindo sokuphrinta esiphezulu | 80kg |
| Ukubekezela kwe-resin | 15kg |
| Indlela yokuskena | ukuskena okuguquguqukayo kwe-beam |
| Ukwenza ukunemba | ±0.1mm(L≤100mm), ±0.1%×L(L>100mm) |
| Indlela yokushisa ye-resin | ukushisa komoya oshisayo (kuyakhetheka) |
| Isivinini sokuskena esiphezulu | 10m/s |
| Ithangi lokugcina le-resin | yebo |
| I-resin vat | / |
| I-vat eyisizayo | / |
| Uhlobo lwe-resin | SZUV-W8001(white), SZUV-S9006(high toughness), SZUV-S9008(flexible), SZUV-C6006(clear), SZUV-T100(high temperature resistance), SZUV-P01(umswakama-proof), others |
| Uhlobo lwe-laser | I-laser yesimo esiqinile engu-355nm |
| Amandla e-laser | 3w@50KHz |
| Isistimu yokuskena | isithwebuli se-galvanometric |
| Indlela yokubuyisela kabusha | ohlakaniphile positioning vacuum recoating |
| Ugqinsi lwesendlalelo | 0.03- 0.25mm (okujwayelekile: 0.1mm; ukunemba: 0.03- 0.1mm; ukusebenza kahle: 0.1- 0.25mm) |
| Elevation motor | ukunemba okuphezulu kwe-servo motor |
| Isixazululo | 0.001mm |
| Ukubeka kabusha Ukunemba | ±0.01mm |
| Ipulatifomu ye-Datum | imabula |
| Uhlelo lokusebenza | Windows 7/10 |
| Lawula isofthiwe | I-SHDM SL 3D Printer Control Software V2.0 |
| Ifomethi yefayela | Ifayela le-STL / SLC |
| I-inthanethi | I-Ethernet / Wi-Fi |
| Okokufaka kwamandla | 220VAC,50HZ,16A |
| Izinga lokushisa/umswakama | 24-28℃/35-45% |
